Application
Mobile Homes where connection available to mains water supply.
Specifications
| FM12 |
Inlet: |
15mm, 1/2" BSP (female) |
| Outlet: |
12mm John Guest connector |
| Length |
84mm |
- Integral Filter
- Watermark Approval AS 1357.2 Lic. 02596
| FMSC12 |
Inlet: |
15mm, 1/2" BSP (female) |
| Outlet: |
12mm John Guest connector |
| Length: |
107mm |
- Integral single check valve.
- Integral filter.
- Resists water hammer.
- Stops backflow.
| Flow rate: |
15 L/min at 700 kPa [100 P.S.I.] inlet pressure |
| Pressure ratio: |
10:1 (for every 10 kPa [1.5 P.S.I.] increase in inlet pressure above
1000kPa [150 P.S.I.], the outlet pressure will increase by 1 kPa [0.145 P.S.I.). |
| Outlet pressures: |
350 kPa [50 P.S.I.] |
| Maximum inlet pressure: |
2000 kPa [290 P.S.I.] |
| Maximum temperature: |
60°C |
| Minimum temperature: |
1°C |
Installation
- Installation must be carried out by a Qualified Person.
- All pipe work must be flushed prior to installation.
- Must be protected by a line strainer (integral with FM).
- Do NOT apply heat near valve during installation.
- May be fitted in any orientation.
- Must be fitted downstream of approved isolating valves.
|
 |
|
|
Product Codes
| FM12 350 |
350 kPa |
| FMSC12 350 |
350 kPa |
|
